South Bend SB1352 5" 3 Jaw Chuck D1-3

Description

SB1352
5" 3 Jaw Chuck D1-3
Sold and shipped by Grizzly Industrial, Inc., this item is brand new in factory packaging and covered by our one-year warranty!
SB1352 5" 3 Jaw Chuck D1-3
Absolute top quality chucks made for high precision work.
The D1-3 South Bend SB1352 5" 3-Jaw Chucks are amongst the best available on the market.
High-precision cast-iron 3-Jaw scroll chucks with two-piece jaws and direct mount backs with a D1-3 camlock mount.
Direct-mount chucks require less initial setup time because the machinist is not required to machine a back plate to fit the chuck.
The main benefit of a direct-mount chuck is a larger maximum working area between the chuck jaws and tailstock because there is no back plate.
Made with tight tolerances to satisfy the most demanding machinists out there!
The instruction sheet was written by our U.S. based Technical Documentation Department and is packed with useful information.
Like all South Bend products, it comes with a 2-year warranty which covers parts and assures the unit is free from factory defects.
The South Bend Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the chuck are available on-line and shipped from the South Bend parts warehouse in Springfield, MO.
SPECIFICATIONS:
Outer diameter: 4.92"
Bore diameter: 1.26"
Outer diameter clamping: 0.12" – 4.65"
Inner diameter clamping: 1.78" – 4.61"
Max speed: 2500 RPM*
Chuck jaw 5/16" cap screw torque: 14.5 ft/lbs.
Rear chuck M8 cap screw torque: 28 ft/lbs.
Maximum chuck key torque: 47 ft/lbs.**
Static clamping force: 3370 lbs.**
Approximate shipping weight: 12 lbs.
FEATURES:
Fine-grain cast-iron body
Direct mount D1-3 mounting
Threaded pinion retaining pins
Two-piece center split chuck
Two-piece jaws for speedy internal/external clamping changes
Three reversable top jaws for additional work-holding options
*The maximum speed listed above is ONLY possible with the chuck jaws and the workpiece in complete rotational symmetry. The workpiece weight must be within the limits of the lathe, and the workpiece mass must be of equal density throughout to prevent centrifugal imbalance or radial runout—even if a tailstock or other support is used for additional support.
Please visit the Ordering and Shipping Questions page on our grizauctions store front for more information on which states are charged sales tax. You are welcome to pick up your purchase from one of our showrooms in either Bellingham, Washington or Springfield, Missouri if stock is available in that facility. Please contact us if you wish to make pick up arrangements. Sales tax will apply for purchases picked up in our showrooms.
We are committed to your satisfaction. If you have any issues with your purchase, or if you receive your item with shipping damage, please contact us right away so we can take care of the issue.
Since our inception in 1983, Grizzly Industrial®, Inc. has grown into one of the largest machinery companies in the United States. Our products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops.
We have the widest product selection under one brand in the world and we sell direct to the user, cutting out the dealer network, and resulting in lower prices to you.
GRIZAUCTIONS is the only official seller of Grizzly products on eBay. We ARE Grizzly Industrial, Inc. and claims by other sellers to be or to represent Grizzly Industrial are fraudulent and must be reported to eBay and to us for legal action.
We reserve the right to correct errors and omissions in our listings, including specifications, photographs, and pricing.
Thank you for your interest.
eBay Stores - Grizzly Industrial, Inc.
sdw092917
3